Se Habla Espa?ol
Email: sales@ms-d.com
En Espa?ol: luis@ms-d.com
Our Heavy Duty cylinder disassembly/assembly table and tooling designed for cylinders up to 24 to 30 inches in diameter. The table is designed with the top rail modified from 3/4" to 1-1/4" steel and is 26.5 ft. Long. A cylinder assist for disassembly and re assembly, a 24" heavy duty triple chain vise, a pressure boost system and 70K Nut Buster have been developed in conjunction with the heavy duty disassembly table.
Download an informational brochure on the Disassembly Bench Model MSD-D-HD26
We accept:
Use our internal tube washer to wash tubes and cylinders before assembly process.
We offer caustic tank services for repainting jobs requiring the removal of paint and component cleaning in order to have only the bare metal surface. Our caustic tanks are designed for caustic soda or sodium hydroxide. All caustic tanks meet applicable safety and regulatory requirements.
The MSD-ITW (internal tube washer) is manufactured to clean the inside of tubes and cylinders prior to reassembly. Our tube washer uses ATF or any other hydraulic fluid for washing and flushing thus eliminating the need for rinsing. The washer roles easily, on four casters, and is positioned at the end of our Disassembly Table that is used to hold the cylinder. The hand held pistol grip drive and oil pump are air operated for safe and trouble free with a single power source.
The first stage is a heavy duty, 40-micron filter roll (J) that can be advanced to expose new media as contaminants build up in the roll. The second stage is a magnetic sheet (K) under the filter roll to remove the larger ferrous materials. The final stage is a 10-micron spin-on hydraulic filter (L) in the lower cabinet. It cleans the oil coming out of the pump, prior to washing and flushing the cylinder tube.
The MSD-ITW-LW tube cleaner is an air-powered system designed to clean the inside diameter of hydraulic cylinder tubes with brushes and a solvent. Capacity is from 10 feet to 100 feet in length, and bore diameters from 3 inch to 12 inch. The MSD ITW-LW (long wall) system is similar to the standard MSD internal tube cleaning system. The standard MSD-ITW contains a 20 gallon solvent tank with an air powered solvent pump and 10-micron filtration. It can be ordered with a pneumatic drive, extensions and brushes for shorter cylinders up to 10 ft long. The long wall system uses a modified MSD-ITW tank assembly with the air-powered head to clean out cylinders up to 100 ft long.
The air powered ITW-LW has two lines from the hose reel, one for air to drive the brush and one for solvent pumped by the diaphragm pump in the ITW. The hand-fed air motor assembly makes the brush head rotate to dislodge contamination from the tube. The system uses Daraclean 236 biodegradable, re-usable solvent for the cleaning process. The cleaning solution is pumped through a 10-micron filter and into the brush head to dislodge and flush out the contaminants. The exhaust port of the air motor is extended backwards to prevent any foaming and misting of the cleaning solvent. The solvent flows out of the cylinder tube and back into the ITW wash cart. The solvent is pre-cleaned in the ITW Cart by a 40-micron paper filter and a magnetic pad under the filter paper to collect any large metal flakes.
The MSD-ITW-LW package with the MSD-ITW makes cleaning large and long cylinders much easier. Our airpowered package is a user friendly and safe way to remove honing oil and machining debris from long tubes.
The MSD-ITW-LW is available in special sizes to meet your needs.
Leveling and anchor holes are provided in each leg.
3/4” drain couplings are located on either end of the table.
Table is reinforced from the underside to provide a flat, rugged work area with a spill containing trough.
Available in 8-, 10- and 12-foot tables, our Utility Table is an ideal working surface to supplement our standard Disassembly Fixture. The drained edges keep the work area free from oil.
Heads, pistons and other hydraulic components can be disassembled on the large work surface. During reassembly the area provides a clean flat surface for repacking and resealing cylinders and assembling other hydraulic components.
The Machinery Service & Design’s Utility Table is a sturdily designed fully drained table. The 2’ x 11’6” working surface is designed to withstand heavy impacts and is constructed for easy installation of jobbing tools such as vises and hand presses. The framework is constructed of heavy gauge 2” X 4” rectangular tubing. The surface is a 1/4” thick steel plate reinforced with structural cross members for extra support. A 4” channel is continuously welded on the circumference of the table to capture any liquid that might run off the table surface. 3/4” drain couplings are provided at both ends of the table to facilitate your oil capture system. The table’s legs are provided with leveling and/or anchor holes to level and secure the table in place for a safe working environment.
Hot caustic tanks are used to strip paint and clean components down to bare metal, preparing the components for repainting.
Our standard caustic tank is constructed of 318 stainless steel, mounted into a frame made of 2’ x 4” rectangular ?” wall tube. The unit is approximately 3’-6” wide X 3’-6” high X 12’-0” long. The main caustic tank holds 500 gallons of caustic solution. Using our approach, the system can be scaled to your specifications.
The MSD air over oil power unit is an economical power source for the MSD Nut Buster?. This air over oil power unit is an alternative to electric powered hydraulic system. The assembly is mounted into a framework that can be fitted with casters for ease of movement and connects directly to our Nut Buster?.